Need help?Do you have a question about the IK Multimedia AmpliTube X-TIME and is the answer not in the manual?
General| Type | Delay Pedal |
|---|---|
| Technology | Digital |
| USB | Yes |
| Bypass | True Bypass |
| Display | LCD |
| Controls | Footswitches |
| Connectivity | USB, MIDI |
| MIDI | In/Out |
| Power Source | 9V DC |
| Inputs | 2 x 1/4" |
| Outputs | 2 x 1/4" |
| Power Supply | 9V DC |
| Presets | 300 total, 50 factory |
Selects among the 16 delay algorithms. Push to go back when browsing menus.
Browses through 300 preset slots. Push to save a preset and choose name/bank.
Accesses model-specific parameters. Push for additional, hold for global/preset setups.
Controls delay time in milliseconds or Time Signatures when BPM SYNC is active.
Controls the number of repetitions occurring in the delay.
Controls the frequency response of the delay, affecting tone brightness.
Controls modulation effects like saturation, depth, or rate depending on the model.
Balances the dry and wet signal levels, from fully dry to fully wet.
Indicate preset status: green for active, amber for edited, off for bypassed.
Indicates tempo status: blue for milliseconds, green for BPM, amber for MIDI clock.
Control preset/bank switching, temporary activation, and tap tempo functions.
Connect your instrument here. Use the left input for mono instruments.
Connect to amplifiers, PA, or other devices. Use the left output for mono.
Connect external MIDI controllers to browse presets and modulate parameters.
Connect to external MIDI devices to send MIDI messages.
Connect an expression or switch pedal for parameter control.
Connect to a computer for audio interface and librarian app functions.
Connect the required 9V DC center negative power supply.
Assign expression or single switch pedals to parameters to create macros for simultaneous control.
Set up a double switch pedal to easily navigate between presets or banks.
Classic tape echo with wobble effect for experimental lo-fi repeats.
Modern tape echo with modulation for depth and speed, creating movement.
Harmonically rich analog delay with saturation and filters for console-like tones.
Crystal-clear digital delay with doubler mode for wide stereo repeats.
Delay with alternating left/right or L-C-R panning for a groovy effect.
Features 16 different delay patterns for rhythmic experimentation.
Two delays in series or parallel with independent controls for stereo sound.
Creates amazing reversed delay tails with an optional non-reversed tap blend.
Advanced ping pong delay with modulated reverb and a reversed second tap.
Ambient swell delays with independent time/depth for smooth lines.
Delay that ducks down when dry signal plays, with adjustable release time.
Creates pitched effects in repeats with up to three pitched notes.
Harmonizes tone up or down with up to three harmonies following the lead note.
Saturated and distorted delay with a phaser effect for aggressive tones.
'50s style slapback delay with modulated filter for stereo movement.
Lush delay with flanger and shimmer for modern ambient sounds.
Configures how preset names are displayed on the device screen.
Selects the type of external controller pedal connected to the EXT. CONTROL jack.
Sets the operative mode for a connected double switch pedal (BANK or PRESET).
Initiates the calibration process for a connected expression pedal.
Selects the MIDI channel (1-16) on which the pedal operates.
Selects which MIDI signals are sent to the MIDI outputs (OFF, THRU, MERGE).
Controls the master volume of the pedal across all modes.
Controls master volume when the pedal is in audio interface mode.
Sets the BPM for all presets when BPM MODE is set to GLOBAL.
Sets the MIDI CLOCK function (OFF, DIN, USB, INTERNAL).
Activates and selects the cabinet simulator IR (OFF, CAB 1-4, BASS).
Enables spillover for delay tails to persist when bypassing presets.
Configures signals sent to the USB OUT (STEREO or DUAL).
Selects between TRUE bypass or BUFFERED bypass technology.
Sets the pedal's operative mode for LIVE performance or as an audio INTERFACE.
Resets the pedal to its original factory default settings.
Sets whether the preset BPM follows the global BPM or its own preset BPM.
Determines if time is expressed in milliseconds or tied to BPM settings.
Sets the Beats Per Minute for the current preset when BPM SYNC is ON.
Enables or disables external control for the currently selected preset.
Initiates the process to assign external controls and create macros.
Details on using the TAP footswitch, BPM SYNC, and BPM MODE functions.
To Next Page