EasyManua.ls Logo

IK Multimedia AmpliTube X-TIME - PITCH

IK Multimedia AmpliTube X-TIME
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AmpliTube X-TIME
Delay Models
24
PITCH
A delay that pitches up or down from the original tone to create pitched effects in the repeats. It features three
pitched notes to get a triple-pitched effect and create a wall of lines in the delay by easily using one finger.
Parameters
• TIME: controls the time of the first delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FEEDBACK: controls the number of repetitions occurring in the first delay.
From 0% to 100%.
• FILTER: controls the tilt filter gain for the first delay. Turn it counterclockwise to get darker tones or
clockwise get the full frequency spectrum.
From -20 dB to +20 dB.
• MOD: controls the pitch of the first delay.
From -24 semitones to 24 semitones.
• MIX: controls the balance of dry and wet signal. At 0% the signal is fully dry, while at 100% the signal is
fully wet. At around 85% the dry and wet signal have the same level.
From 0% to 100%.
• LEVEL 2: controls the volume of the second delay.
From 0 to 10
• TIME 2: controls the time of the second delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FDBK 2: controls the number of repetitions occurring in the second delay.
From 0% to 100%.
• FILTER 2: controls the tilt filter gain for the second delay. Turn it counterclockwise to get darker tones or
clockwise get the full frequency spectrum.
From -10 dB to +10 dB.
• PITCH 2: controls the pitch of the second delay.
From -24 semitones to 24 semitones.
• PAN 2: controls the pan of the second delay in the stereo spectrum.
From -1 to +1.
• LEVEL 3: controls the volume of the third delay.
From 0 to 10
• TIME 3: controls the time of the third delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FDBK 3: controls the number of repetitions occurring in the third delay.
From 0% to 100%.
• FILTER 3: controls the tilt filter gain for the third delay. Turn it counterclockwise to get darker tones or
clockwise get the full frequency spectrum.
From -10 dB to +10 dB.
• PITCH 3: controls the pitch of the third delay.
From -24 semitones to 24 semitones.
• PAN 3: controls the pan of the third delay in the stereo spectrum.
From -1 to +1.

Related product manuals