To Next Page

To Previous Page

AmpliTube X-TIME

Temporary Mode

By holding down a preset’s footswitch while it’s off, the preset gets activated temporarily and is deactivated

when the footswitch is released.

You can do this operation both when the pedal is bypassed to engage a certain effect only for a little time or

while another preset is on.

If you do it while another preset is on, this mode will allow you to quickly change to the other preset by holding

down its footswitch and coming back to the previous one once you release the footswitch.

IK Multimedia AmpliTube X-TIME User Manual

Questions and Answers: