Need help?Do you have a question about the IK Multimedia AXE I/O SOLO and is the answer not in the manual?
General| Type | USB Audio Interface |
|---|---|
| Channels | 2 |
| A/D Resolution | 24-bit |
| Phantom Power | Yes |
| Direct Monitoring | Yes |
| USB Interface | USB 2.0 |
| MIDI I/O | No |
| Software | AmpliTube 5 SE |
| OS Requirements - Mac | macOS 10.13 or later |
| OS Requirements - PC | Windows 10 or later |
| Outputs | 2 |
| Power | USB Bus Powered |
Access technical support, activate warranty, and receive JamPoints™ for discounts on future IK purchases.
Detailed descriptions of all controls and connectors on the AXE I/O SOLO front panel.
Explanation of all ports and connectors located on the rear of the AXE I/O SOLO unit.
Guide to downloading, installing software, and connecting the AXE I/O SOLO to your computer.
Using the AMP OUT for re-amplification and connecting to external amps or stomps.
Selecting JFET/PURE preamp topologies and matching guitar pickups for optimal tone.
Creative tone shaping by adjusting input impedance using the Z-TONE™ control.
Connecting pedals for MIDI control and assigning messages via the Control app.
Connecting condenser, dynamic, and ribbon microphones with phantom power considerations.
Connecting guitars, basses, speakers, and headphones to the AXE I/O SOLO.
Using the direct monitoring feature for zero-latency input signal monitoring.
Exploring the Control software's 'Interface' tab for hardware and audio configuration.
Configuring MIDI channels, pedals, and CC# settings in the 'Controller' tab.
Comprehensive technical specifications for the AXE I/O SOLO audio interface.
Details on accessing warranty policies and customer support resources.
FCC compliance statements and manual revision notes.
To Next Page