English
8
2 Dedicated guitar features
2.1 Direct amplifier output & Re-Amplification
RE-AMPLIFICATION
in from MIC
Among the features that make AXE I/O SOLO the definitive guitarist interface is the Re-Amplification feature.
The “AMP OUT” is a third physical output which is independent from main Output 1-2. With this output, you can
feed a DI recorded guitar to external analogue stomps or a real amplifier, still being able to monitor the session
from main Output (1-2). The external stomps (or the miked amplifier) will be connected back to Input to return
into the DAW on a newly recorded track.
The AMP OUT is a floating unbalanced output topology specifically designed to properly interface with guitar
or bass amplifiers of any kind for maximum signal fidelity and integrity. This ensures the immunity from noises
caused by ground loops with the Amps, so actually allowing reamping without the typical associated noise/hum
issues.
To Next Page
Loading...
Need help?
General
