Contents
2
Table of Contents
Contents 2
English 3
AXE I/O SOLO 3
Register your AXE I/O SOLO 3
Front panel 4
Rear panel 5
1 Installation and setup 6
1.1 Software installation 6
1.2 Setup 6
2 Dedicated guitar features 8
2.1 Direct amplifier output & Re-Amplification 8
2.2 JFET / PURE input (only for Instrument Input 1) 9
2.3 Pick-Up selector (only for Instrument Input 1) 9
2.4 Variable impedance (Z-TONE™) control (only for Instrument Input 1) 10
2.6 External control 11
3 Setup your DAW 12
4 Connecting microphones 12
4.1 Condenser microphones 12
4.2 Dynamic microphones 12
4.3 Ribbon microphones 12
5 Connecting instrument 13
6 Connecting loudspeakers and headphones 14
7 Direct monitoring 15
8 Control software 15
8.1 Interface view 16
8.2 Controller tab 18
9 Specifications 19
Warranty 20
Support and more info 20
Regulatory 21
To Next Page
Loading...
