AmpliTube X-TIME
Global Setup
34
MIDI THRU
Selects which MIDI signals are sent to the MIDI outputs (MIDI and USB ports).
• OFF: no MIDI signals are sent to the MIDI outputs.
• THRU: the MIDI signals arriving to the X-GEAR MIDI input are sent to the X-GEAR MIDI outputs.
• MERGE: the MIDI signals arriving to the X-GEAR MIDI input and the MIDI signals generated by the pedal
are merged and sent to the X-GEAR MIDI outputs.
MAIN VOL
Controls the master volume of the pedal from -40 dB to +3 dB.
INTERFACE VOL
Controls the master volume when the pedal is set in interface mode from -40 dB to +3 dB.
By default, the volume is set to -20 dB.
GLOBAL BPM
Sets the BPM for all the presets with BPM MODE set to GLOBAL, from 55 to 260 BPM.
This global BPM is changed when:
• A tempo is tapped on a preset with BPM MODE set to GLOBAL.
• The MIDI CLOCK is coming from outside and sets this BPM.
• This menu voice is manually changed.
MIDI CLOCK
Sets the MIDI CLOCK function.
• OFF: no MIDI CLOCK function is active.
• DIN: the MIDI CLOCK is set by the incoming MIDI clock from the MIDI input.
• USB: the MIDI CLOCK is set by the incoming MIDI clock from the USB input.
• INTERNAL: the MIDI CLOCK is set by the pedal and sent out through both USB and MIDI outputs, the
pedal acts as master.
N.B. When the MIDI CLOCK is coming from outside the TAP Tempo footswitch is disabled and is synced with
the incoming tempo, its led becomes amber to get visual feedback of this status.
CAB SIM
Activates and selects the cabinet simulator.
• OFF: disables Cab Sim.
• CAB 1: activates the Cab Sim with the first cabinet IR.
• CAB 2: activates the Cab Sim with the second cabinet IR.
• CAB 3: activates the Cab Sim with the third cabinet IR.
• CAB 4: activates the Cab Sim with the fourth cabinet IR.
• BASS: activates the Cab Sim with the fifth cabinet IR.
N.B. If you also want the Cab Sim when the pedal is bypassed, the BUFFER BYPASS MODE is required.
To Next Page
Loading...
Need help?
General
