IK Multimedia AmpliTube X-DRIVE - MIDI Channel and Thru Settings; Volume Controls (Main, Aux, Interface); MIDI Clock and USB Output Settings; Ground Lift Switch

AmpliTube X-DRIVE
Global Setup
45
MIDI CHANNEL
Selects on which MIDI channel the X-GEAR pedal operates, from 1 to 16. By default, X-GEAR pedals operate to
channel 1.
MIDI THRU
Selects which MIDI signals are sent to the MIDI outputs (MIDI and USB ports).
• OFF: no MIDI signals are sent to the MIDI outputs.
• THRU: the MIDI signals arriving to the X-GEAR MIDI input are sent to the X-GEAR MIDI outputs.
• MERGE: the MIDI signals arriving to the X-GEAR MIDI input and the MIDI signals generated by the pedal
are merged and sent to the X-GEAR MIDI outputs.
MAIN VOL
Controls the master volume of the pedal from -40 dB to +3 dB.
AUX VOL
Controls the volume for the auxiliary outputs (CAB SIM OUT and HEADPHONE OUT) from -40 dB to +3 dB.
INTERFACE VOL
Controls the master volume when the pedal is set in interface mode from -40 dB to +3 dB.
By default, the volume is set to -20 dB.
MIDI CLOCK
Sets the MIDI CLOCK function.
• OFF: no MIDI CLOCK function is active.
• DIN: the MIDI CLOCK is set by the incoming MIDI clock from the MIDI input.
• USB: the MIDI CLOCK is set by the incoming MIDI clock from the USB input.
USB OUT
Sets what signals are sent to the USB OUT.
• CAB OFF: on USB OUT 1 is sent a copy of the MAIN OUT (without the CAB SIM), on USB OUT 2 is sent a
copy of the dry DI signal.
• CAB ON: on USB OUT 1 is sent a copy of the CAB SIM OUT (with the CAB SIM), on USB OUT 2 is sent a
copy of the dry DI signal.
GRND LIFT
Activates or deactivates the ground lift to remove buzzes.