UNO Drum
2- Turning the unit ON/OFF - Calibration process
9
2 – Turning the unit ON/OFF - Calibration process
When the unit is powered ON, it automatically starts the first tuning and capacitance sensing.
Do not press buttons or put objects on the unit during the calibration as this will incorrectly calibrate the
capacitance sensing system. In case of incorrect calibration of the capacitance sensing system, please power
off the unit, and then turn it on again to repeat the process.
Various noises and calibration sounds might be audible during the startup of the unit, so we recommend turning
the volume down while starting up.
To Next Page
Loading...
Need help?
General