4
Contents
EU Declaration of conformity
We declare under our sole responsibility that this product corresponds to the
directives 2006/95/EC, 2004/108/EC and 2011/65/EU and conforms with the
standards or normative documents: EN 61010-1, EN 6010-2-051 and EN 61326-1.
A copy of the complete EU Declaration of Conformity can be requested at
sales@ika.com.
Page
EU Declaration of conformity 4
Explication of warning symbols 4
Safety instructions 4
Intended use 6
Unpacking 7
Useful information 7
Commissioning 9
Exchanging and replacing the grinding tools 10
Malfunctions and eliminating malfunctions 10
Maintenance and cleaning 12
Accessories 14
Technical data 15
Warranty 16
These operating instructions apply to all
IKA
- S versions
(e.g. A 11 basic S 001).
EN
Safety instructions
Explication of warning symbols
DANGER
CAUTION
WARNING
NOTICE
Indicates an imminently hazardous situation, which, if not
avoided, will result in death, serious injury.
Indicates a potentially hazardous situation, which, if not
avoided, can result in death, serious injury.
Indicates a potentially hazardous situation, which, if not
avoided, can result in injury.
Indicates practices which, if not avoided, can result in
equipment damage.
General information:
› Read the operating instructions completely before starting up and fol-
low the safety instructions.
› Keep the operating instructions in a place where it can be accessed by everyone.
› Ensure that only trained staff work with the device.
› Follow the safety instructions, guidelines, occupational health, safety and acci-
dent prevention regulations.
› The device must only be used in a technically perfect condition.
To Next Page
Loading...
