Need help?Do you have a question about the IKA C 3000 isoperibol and is the answer not in the manual?
General| Model | IKA C 3000 isoperibol |
|---|---|
| Measuring method | Isoperibol |
| Oxygen filling pressure, max. | 40 bar |
| Measuring range max. | 40, 000 J |
| Resolution | 0.001 K |
| Temperature measurement resolution | 0.0001 K |
| Temperature Resolution | 0.0001 K |
| Accuracy | ±0.1 % |
| Cooling System | Water cooling |
| Type of calorimeter | Isoperibol |
| Power Supply | 220 - 240 V/ 50/60 Hz |
| Reproducibility (1g benzoic acid) | ≤ 0.1% |
| Precision | ≤ 0.1% |
States product compliance with EU directives and standards.
Explains DANGER, WARNING, CAUTION, and NOTICE symbols for hazard communication.
Warns about oxygen being an oxidizer and its reactivity.
Highlights hazards of combustion gases and ventilation needs.
Emphasizes observing accident prevention and wearing PPE.
Defines the intended use and basic operating principle of the calorimeter.
Specifies ideal environmental conditions for installation.
Guides on connecting the oxygen supply for combustion.
Details the various elements shown on the display.
Explains how to input sample weight using virtual keyboard.
Explains numerical input for sample weight via virtual keyboard.
Steps for powering on the calorimeter.
Describes the automatic system check upon startup.
Outlines the steps for performing a standard calorimetric measurement.
Explains the process of calculating calorific value.
Warns about handling unknown samples.
Emphasizes the importance of complete combustion for accurate results.
Explains the process and necessity of system calibration.
Provides guidelines for performing calibration.
Details the preparatory steps before taking a measurement.
Details the steps to initiate a measurement.
Describes selecting a measurement to evaluate.
Guides on identifying and resolving system faults and errors.
To Next Page
