15
Content
Safety instructions
EN
Source language: German
Indicates an (extremely) hazardous situation, which, if
not avoided, will result in death, serious injury.
Indicates a potentially hazardous situation, which, if not
avoided, can result in death, serious injury.
Indicates a potentially hazardous situation, which, if not
avoided, can result in injury.
Indicates practices which, if not avoided, can result in
equipment damage.
Indicates crushing risk of fingers/hand.
Warning symbols
Declaration of conformity
We declare under our sole responsibility that this product corresponds to the re-
gulations 2014/35/EU, 2006/42/EC, 2014/30/EU and 2011/65/EU and conforms
with the standards or standardized documents EN 61010-1, -2-051,
EN 61326-1
,
EN 60529 and EN ISO 12100.
For your protection
• Read the operating instructions in full before starting up and fol-
low the safety instructions.
• Keep the operating instructions in a place where they can be accessed by
everyone.
• Ensure that only trained staff work with the appliance.
• Follow the safety instructions, guidelines, occupational health and safety
and accident prevention regulations.
WARNING
Wear your personal protective equipment in accor-
dance with the hazard category of the medium to
be processed. Otherwise there is a risk of:
- splashing liquids
- projectile parts
-
body parts
, hair, clothing and jewellery getting caught.
• Keep hand/arm vibration to a minimum (Directive 2002/44/EC) when ope-
rated manually:
- Keep the sample container as vertical as possible.
- Only exert the minimum pressure necessary for the mixing process.
- Use attachments for multiple samples when there is a large number of
samples.
• Set up the appliance in a spacious area on an even, stable, clean, non-slip,
dry and fireproof surface.
• The feet of the appliance must be clean and undamaged.
CAUTION
Before starting the device set a low speed.
Gradually increase the speed.
• If the shaking movement of the appliance increases (resonance), reduce the
speed or pass through the critical phase as quickly as possible.
• Reduce the speed if
- the medium splashes out of the vessel because the speed is too high
- the appliance is not running smoothly
- the appliance begins to move around because of dynamic forces.
CAUTION
Caution! Risk of crushing when changing attach-
ments.
CAUTION
DANGER
WARNING
CAUTION
NOTICE
Page
Device setup/Display 2/3
Declaration of conformity 15
Warning symbols
15
Safety instructions 15
Unpack 16
Correct use
16
Commissioning
17
Accessories 19
Interface and output
20
Connection, laboratory device - PC
21
Error code 21
Maintenance 22
Technical data 22
Warranty 23
To Next Page
Loading...
