CHANGING LAMPS
* If equipped
Door light*
Pull out the light carefully from the door.
Turn the holder, and remove it. Detach the
bulb from the bulb holder, and replace a
new one.
Number plate light
Push the light to the left, and turn it down
to remove. Turn the bulb holder, and take
it out and replace a new one.
Map reading lamp (Middle)
To replace a map reading lamp, turn the
screws of the light cover. Remove the
cover and loose the connector. Turn the
bulb anti-clockwise and remove it. After
replacing the bulb, ret the lamp.
Warning
All the bulbs are vacuumed and maybe
broken at the time of changing them
and subsequently cause the wound.
To Next Page
Loading...
