EasyManua.ls Logo

Ikco SAMAND - Starting & Driving (Cng Mode)

Ikco SAMAND
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93
3
* If equipped
STARTING / DRIVING (CNG MODE)
Starting & driving on CNG mode*
Changing the type of fuel is done by the fuel
conversion key located on the front console
and you can choose the type of fuel as follows:
A. Before moving (at rst the car will start
on gasoline then it will switch to gas)
B. During driving
C. Starting the car directly on gas mode**
Warning
While your vehicle engine is running,
never park your vehicle in a location
where there are inammable objects
and materials in the vicinity of hot
exhaust pipe like dry hay or leaves.
Caution**
This mode should only be used in
case of emergency such as gasoline
shortage. In normal conditions, due
to the possible damage to gas fuelled
components, this method is not advised.
Fuel Conversion Key*
The fuel conversion key is on the front console
next to the digital clock and it is used from switch
from gasoline to gas and vice versa mode.
By pressing the related key, the fuel type can
be changed.
Starting the engine*
The engine starts on gasoline mode.
Since gasoline pump is turned on, even
when the car runs on gas, and also to cool
fuel injectors, it is necessary to have at
least 5 liters of gasoline in the fuel tank.
In the case of any damage to gasoline
system, the engin nally starts on gas mode.
Starting the Engine on CNG Mode*
To remind you, this method is used only for
special situations like gasoline shortage.
Firstturned the switch on, and then press the
conversion key for 5 seconds before starting
till the gas warning light
appears on the
instrument panel. Then start. If there is no
technical malfunction in the gas system, the
engine will start on CNG.

Table of Contents

Other manuals for Ikco SAMAND

Related product manuals