EasyManua.ls Logo

Ikco SAMAND - Page 162

Ikco SAMAND
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
161
6
* If equipped EF7
**
It's recommended to use the approved brands and packages, offered by the Isaco.
TECHNICAL INFORMATION
Allowed type of engine oil (along with standard and qualitative level of oil)
10 W 40 API SL
10 W 40 API SJ
Required capacity of engine oil at the time of changing
With lter 5.5
Without lter 5
Appropriate distance for changing oil
Easy condition Every 12000 KM
Hard condition Every 10000 KM
Oil lter Cartridge type
Proper time for changing oil lter Engine oil replace
Period for checking level of engine oil.
Oil surface must be checked every 1000 km.
Min. quantity of oil (Lower line of Gage)4.45.And Max.
quantity of oil (upper line of Gage) 5.2 liter.
Allowed range of engine oil reduction in ever 1000 km. 0.2 liter (200 cc)
TECHNICAL SPECIFICATIONS OF ENGINE OIL SUITABLE FOR EF7**
*
ENGINE
Hard conditions are as follows:
Towing, Towing of caravan, Carrying load on rack in long distances, Moving in dusty roads, Frequent traversing of short distances (less
than 8 km in every travelling), Traversing of long distances with a monotonous and low speed ,Long period of not using of vehicle.
Important note:
Using of all SAE 20 W 50 oils are not allowed in EF7 engines and are not approved.

Table of Contents

Other manuals for Ikco SAMAND

Related product manuals