15
ENGLISH
Timer
(generic)
Timer with alarm for generic use.
The 3 digits for the Timer management commands show “- - -”.
Press the digit to access the Timer menu and view “ 0 0 0 “.
Press “+” or “-” to set the countdown.
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
Minutes
Hours
Tenths
by pressing any of the buttons.
Repeat the operations described to modify the countdown value.
Press the digit to access the Timer menu and use “+” and “-” to set the Display to “ 0 0 0 “.
Melting
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
.
The digit for the selected area will show
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
or press .
Heat-up
Function
This function is used to heat up a pan at maximum power before continuing to cook at a
selected level. The period of time the cooking area will remain at maximum power depends on
Lev. Power Time
1 48 seconds
2
144 seconds
3 230 seconds
4 312 seconds
5 408 seconds
6 120 seconds
7 168 seconds
8 216 seconds
9 not available
P not available
To activate, with a pan on the hob and selected cooking area, press and hold for 3 seconds on
the selected value (from 1 to 8) on the power bar. The Display for the corresponding area shows
“ A “ .
It is possible to increase the cooking level, but if it is decreased the function is deactivated.
It can also be deactivated by pressing and holding for 3 seconds the button for the cooking area
in question.
Pause
Function
This function allows any other active function on the hob to be paused/resumed, reducing the
power in the cooking area and all the functions to zero. If the pause function is not deactivated
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
for at least 1 second. All the Displays show .
n
200
n
145
20
15
20
20
20
S1021 (190715)
All Symbols
4.7
9.4
5.5
10.7
seconds. The function is deactivated and the hob continues with the previous setting.
To Next Page
Loading...
