What to do if and a number come on my IKEA Cooktop?
If your IKEA Cooktop displays a number , it indicates an error. To resolve this, disconnect the hob from the electrical supply for a while by disconnecting the fuse from the electrical system of the house and then reconnect it. If the error reappears, contact an authorised installer.
Why I cannot switch on or operate my IKEA Cooktop?
If your IKEA Cooktop won't switch on or operate, it could be due to a few reasons. First, check that the appliance is correctly connected to the electrical supply. If it's still not working, try switching it on again, especially if more than 10 seconds have passed since the last attempt. Also, make sure that Child Lock or Lock is deactivated. Avoid touching several symbols on the control panel at the same time and ensure the control panel is clean and dry before use. If the problem persists, consider having an authorised installer check the installation.
What to do if there is no signal when I touch panel symbols on my IKEA Cooktop?
If there's no signal when you touch the panel symbols on your IKEA Cooktop, the signals might be deactivated. To fix this, you need to activate the signals. Please refer to 'OffSound Control' for instructions on how to do this.
What to do if my IKEA Hob won't turn on?
If your IKEA Hob won't switch on or operate, it might not be correctly connected to the electrical supply. Check the connection, and for correct installation, call an authorized installer. It could also be that more than 10 seconds have passed since you last switched it on, so try switching it on again. The Child Lock might also be activated. Also, touching multiple symbols at once or having water or fat stains on the control panel can cause this. Try cleaning the control panel and only touching one symbol at a time.
What to do if residual heat indicator is not displaying anything on IKEA Hob?
If the residual heat indicator isn't displaying anything on your IKEA Hob, and you believe the cooking zone should be hot, contact After Sales Service.
Why does the display keep switching between two power settings on my IKEA Cooktop?
The display of your IKEA Cooktop might switch between two power settings because the power exchange function is reducing the power of the cooking zone. For more information, refer to 'Power exchange function'.
Why isn't the residual heat indicator working on my IKEA Hob?
If the residual heat indicator on your IKEA hob isn't lighting up, it could be because the zone wasn't hot enough due to only being used for a short period. If the zone was used long enough to be hot, contact After Sales Service.
What to do if and a number come on my IKEA Hob?
If the IKEA hob displays and a number, it indicates an error. To resolve this, disconnect the hob from the electrical supply for a short period. You can do this by disconnecting the fuse from your home's electrical system and then reconnecting it. If the error reappears, it's best to consult with an authorized installer.
What to do if a number and come on my IKEA Hob?
If your IKEA Hob displays an error code, try disconnecting it from the electrical supply for a short period. You can do this by disconnecting the fuse from your home's electrical system. Then, reconnect it. If the error code reappears, it's recommended to speak with an authorized installer.
Why does my IKEA GRUNDAD show an error code and a number?
If your IKEA Hob displays an error code with a number, there might be an error. To resolve this, disconnect the hob from the electrical supply for a short period by disconnecting the fuse from the house's electrical system, then reconnect it. If the error reappears, contact an authorized installer.
General| Type | Induction Hob |
|---|---|
| Number of Zones | 4 |
| Control Type | Touch Control |
| Width | 59 cm |
| Power Boost | Yes |
| Child Lock | Yes |
| Voltage | 220-240 V |
| Power levels | 9 |
| Timer | Yes |
| Residual heat indicator | Yes |
| Auto-off function | Yes |
| Dimensions | 59 x 52 cm |
Safety guidelines for children and vulnerable individuals using the appliance.
Instructions for installing the appliance safely and correctly.
Guidelines for connecting the appliance to the electrical power supply.
Warnings about fire and explosion hazards during appliance use.
Precautions to prevent damage to the appliance during use.
Wiring diagram for a single-phase power connection.
Wiring diagram for a two-phase power connection.
Diagram showing the layout of the cooking zones.
Explanation of the control panel buttons and indicators.
Instructions for turning the appliance on and off.
Details on the automatic shut-off feature.
Steps to enable or disable audible signals on the appliance.
Information on the types of cookware suitable for induction hobs.
Basic instructions for cleaning the appliance.
Details on cookware suitable for induction cooking zones.
Explanation of normal operational noises and their cause.
Explanation of the appliance's rating plate details.
Key product information for energy efficiency assessment.
Advice on how to save energy while using the appliance.
Duration for which the IKEA guarantee is valid.
What faults and damages are covered by the guarantee.
Specific items or conditions not covered by the IKEA guarantee.
How local laws interact with the guarantee terms.
Geographical validity of the appliance warranty.
To Next Page
