To Next Page
B
brandon45Sep 23, 2025
What to do if comes on on IKEA Hob?
- JJonathan FinleySep 23, 2025
If comes on, switch off the IKEA Hob and switch it on again.
What to do if comes on on IKEA Hob?
If comes on, switch off the IKEA Hob and switch it on again.
What to do if IKEA VILSTA doesn't respond?
If you don't set the power setting quickly enough, the IKEA Hob may not respond. Try switching the hob on again and setting the power setting within 10 seconds.
What to do if my IKEA VILSTA makes a sound and turns off?
If an acoustic signal sounds and the IKEA hob switches off, it means you've likely placed something on one or more of the control panel symbols. Remove the object from the symbols to resolve this.
What does it mean when comes on my IKEA hob?
If comes on, it means that the Automatic Switch Off function is active. To solve this, switch the IKEA hob off and then switch it back on again.
What does it mean when and a number appear on my IKEA VILSTA Hob?
If you see and a number displayed, it indicates an error within the IKEA hob. To attempt a fix, disconnect the hob from the electrical supply for a short period. You can also disconnect the fuse from the house's electrical system, then reconnect it. If the error reappears, it's best to consult with an authorized installer.
Why is there no signal when I touch a symbol on IKEA VILSTA?
If you're not getting any signal when you touch a symbol on the IKEA Hob control panel, the signals may be deactivated. To activate them, refer to the "Daily use" > "Off Sound Control" section.
Why doesn't the residual heat indicator come on IKEA VILSTA?
If the residual heat indicator on your IKEA Hob isn't lighting up, it might be because the zone wasn't hot enough, as it only operated for a short period. However, if the zone was used long enough to become hot, contact After Sales Service for assistance.
Why does the power setting change between two levels on IKEA VILSTA Hob?
If the power setting on your IKEA Hob is fluctuating between two levels, it indicates that the Power exchange function is active. For more information, refer to the "Daily use" section of the manual.
What to do if the IKEA VILSTA fuse is blown?
If the fuse blows, confirm that the fuse is indeed the cause of the malfunction. If the fuse continues to blow repeatedly, it's recommended to contact an authorized installer.
What to do if there are stains on the IKEA VILSTA Hob control panel?
If there is water or fat stains on the control panel of your IKEA hob, clean the control panel and wait a few seconds before activating it again.
Guidance on safe use of the appliance by children and persons with reduced capabilities.
Instructions for installing the appliance, including safety precautions and distances.
Instructions on how to turn the appliance on and off using the power button.
General
