How to troubleshoot IKEA VILSTA Hob that won't turn on?
If your IKEA Hob isn't turning on, it might not be properly connected to the electrical supply. Ensure the hob is correctly connected, referring to the connection diagram for guidance.
What to do if IKEA VILSTA doesn't respond?
If you don't set the power setting quickly enough, the IKEA Hob may not respond. Try switching the hob on again and setting the power setting within 10 seconds.
What to do if my IKEA VILSTA makes a sound and turns off?
If an acoustic signal sounds and the IKEA hob switches off, it means you've likely placed something on one or more of the control panel symbols. Remove the object from the symbols to resolve this.
What does it mean when comes on my IKEA hob?
If comes on, it means that the Automatic Switch Off function is active. To solve this, switch the IKEA hob off and then switch it back on again.
What does it mean when and a number appear on my IKEA VILSTA Hob?
If you see and a number displayed, it indicates an error within the IKEA hob. To attempt a fix, disconnect the hob from the electrical supply for a short period. You can also disconnect the fuse from the house's electrical system, then reconnect it. If the error reappears, it's best to consult with an authorized installer.
What to do if the fuse is blown on my IKEA VILSTA?
If the fuse is blown, ensure that the fuse is indeed the cause of the malfunction. If the fuse continues to blow repeatedly, it is recommended to contact an authorized installer for assistance.
Why are the symbols on my IKEA VILSTA Hob getting hot?
If the symbols on your IKEA hob become hot, it's likely that the cookware being used is too large or is placed too close to the controls. If possible, place larger cookware on the rear zones.
Why isn't the residual heat indicator lighting up on my IKEA VILSTA Hob?
If the residual heat indicator on your IKEA hob doesn't come on, it could be because the zone was not hot enough, as it only operated for a short time. If the zone was on long enough to be hot, contact After Sales Service.
What to do if I didn't set the power on my IKEA VILSTA in time?
If you did not set the power setting in less than 10 seconds, switch on the IKEA hob again and set the power setting in less than 10 seconds.
What to do if there are stains on the IKEA VILSTA Hob control panel?
If there is water or fat stains on the control panel of your IKEA hob, clean the control panel and wait a few seconds before activating it again.
To Next Page
General
