Why does my IKEA GRUNDAD show an error code and a number?
If your IKEA Hob displays an error code with a number, there might be an error. To resolve this, disconnect the hob from the electrical supply for a short period by disconnecting the fuse from the house's electrical system, then reconnect it. If the error reappears, contact an authorized installer.
What to do if my IKEA GRUNDAD is beeping and turning off?
If your IKEA hob is beeping and switching off, or beeping when switched off, it means something is covering the control panel symbols. Remove the object from the symbols.
How to fix an IKEA GRUNDAD Hob that won't turn on?
If the IKEA hob is not switching on or working, make sure it's properly connected to the electrical supply, referring to the connection diagram for guidance. Also, check the fuse to see if it has blown. If the fuse continues to blow, contact an authorized installer. Finally, ensure you set the power setting within 10 seconds of switching the hob on.
What to do if the residual heat indicator is not displaying anything on my IKEA Cooktop?
The residual heat indicator on your IKEA Cooktop might not display anything if the cooking zone was only on for a short time and hasn't gotten hot enough. If you believe the cooking zone should be hot, contact After Sales Service.
Why does the display keep switching between two power settings on my IKEA Cooktop?
The display of your IKEA Cooktop might switch between two power settings because the power exchange function is reducing the power of the cooking zone. For more information, refer to 'Power exchange function'.
What to do if residual heat indicator is not displaying anything on IKEA Hob?
If the residual heat indicator isn't displaying anything on your IKEA Hob, and you believe the cooking zone should be hot, contact After Sales Service.
What to do if my IKEA Hob won't turn on?
If your IKEA Hob won't switch on or operate, it might not be correctly connected to the electrical supply. Check the connection, and for correct installation, call an authorized installer. It could also be that more than 10 seconds have passed since you last switched it on, so try switching it on again. The Child Lock might also be activated. Also, touching multiple symbols at once or having water or fat stains on the control panel can cause this. Try cleaning the control panel and only touching one symbol at a time.
What to do if there is no signal when I touch panel symbols on my IKEA Cooktop?
If there's no signal when you touch the panel symbols on your IKEA Cooktop, the signals might be deactivated. To fix this, you need to activate the signals. Please refer to 'OffSound Control' for instructions on how to do this.
Why I cannot switch on or operate my IKEA Cooktop?
If your IKEA Cooktop won't switch on or operate, it could be due to a few reasons. First, check that the appliance is correctly connected to the electrical supply. If it's still not working, try switching it on again, especially if more than 10 seconds have passed since the last attempt. Also, make sure that Child Lock or Lock is deactivated. Avoid touching several symbols on the control panel at the same time and ensure the control panel is clean and dry before use. If the problem persists, consider having an authorised installer check the installation.
General| Type | Induction Hob |
|---|---|
| Number of Zones | 4 |
| Control Type | Touch Control |
| Width | 59 cm |
| Power Boost | Yes |
| Child Lock | Yes |
| Voltage | 220-240 V |
| Power levels | 9 |
| Timer | Yes |
| Residual heat indicator | Yes |
| Auto-off function | Yes |
| Dimensions | 59 x 52 cm |
Safety guidelines for children and vulnerable individuals using the appliance.
Instructions for installing the appliance safely and correctly.
Guidelines for connecting the appliance to the electrical power supply.
Warnings about fire and explosion hazards during appliance use.
Precautions to prevent damage to the appliance during use.
Wiring diagram for a single-phase power connection.
Wiring diagram for a two-phase power connection.
Diagram showing the layout of the cooking zones.
Explanation of the control panel buttons and indicators.
Instructions for turning the appliance on and off.
Details on the automatic shut-off feature.
Steps to enable or disable audible signals on the appliance.
Information on the types of cookware suitable for induction hobs.
Basic instructions for cleaning the appliance.
Details on cookware suitable for induction cooking zones.
Explanation of normal operational noises and their cause.
Explanation of the appliance's rating plate details.
Key product information for energy efficiency assessment.
Advice on how to save energy while using the appliance.
Duration for which the IKEA guarantee is valid.
What faults and damages are covered by the guarantee.
Specific items or conditions not covered by the IKEA guarantee.
How local laws interact with the guarantee terms.
Geographical validity of the appliance warranty.
To Next Page
