To Next PageTo Next Page
Need help?Do you have a question about the IKEA 501961066054C and is the answer not in the manual?
Gather the required tools and parts before starting installation.
Check that all parts are included with the appliance.
Check local codes and consult gas supplier for necessary parts.
Observe all governing codes and ordinances for placement.
Specific installation requirements for mobile homes.
Diagram and measurements for cabinet openings for the range.
Instructions for connecting the range to the electrical supply.
Information on Natural gas and LP gas compatibility.
Procedure for converting the appliance from Natural gas to LP gas.
Details on rigid and flexible gas supply lines.
Information on the gas pressure regulator and its function.
Steps for removing shipping materials and preparing the range.
Instructions for attaching anti-tip brackets to the range.
Procedure for screwing the leveling legs into the range.
Manually adjusting leveling leg sleeves to set the range height.
Steps to ensure the range is level for proper operation.
Instructions for securing wall anti-tip brackets to the wall.
Instructions for connecting the range using a power supply cord.
Instructions for directly wiring the range to the electrical supply.
Detailed steps for direct wiring using conduit.
Instructions for a 4-wire power supply cord connection.
Connecting directly using copper or aluminum wire.
Instructions for a 4-wire direct connection.
Instructions for a 3-wire power supply cord connection.
Instructions for a 3-wire direct connection.
Connecting the range to the gas line using rigid pipe.
Connecting the range to the gas line using flexible connector.
Opening the shutoff valve and testing for leaks.
Procedure for lighting a surface burner.
Verifying proper function of surface burners.
Procedure to convert the gas pressure regulator for LP gas.
Procedure to convert the gas pressure regulator for Natural gas.
Replacing gas orifice spuds for different gas types.
General
