IKEA Anratta - Daily Use and Functions

ENGLISH 10
Daily use
To activate a Function
1. select the desidered funtion with
A
knob and press
E
button to conrm.
2. the Temperature is Blinking and you can adjust with
G
knob and press
E
button to conrm.
3. the cooking time is visible on the display, you can adjust it with
G
knob or leave to for an
immediate start and press
E
button to conrm.
4. if you selected before a desired cooking time, the display will show the expected time of end,
you can postpone it with
G
knob and press
E
button to conrm the delay.
Preheat
The preheat will start atomatically when available (Check the table) and is included in the
cooking time if you select it before starting the function.
If you select the temperature and a cooking time the preheat starts automatically. If you do not
select the cooking time the timer will start only after reached the desired temperature.
Always an audible sound will advice when the temperature is reached.
Delay to Start
Will be postpone the end of cooking time, when available (Check the table).
Meat Probe
Insert the meat probe before activate a function (Check the table). If the meat probe is inserted
after the conrmation of the cooking temperature, the display will blink the meat probe
temperature, use the
G
knob to adjust it and press
E
button to conrm.
Delay to Start is not applicable when the meat probe is inserted.
When the meat probe tracks the desired temperature, 3 audible signal will sound and the
cooking fuction will ends.
Function
A
Knob
Function
G
Knob
PREHEAT Temperature Time Delay to Start Meat
Probe
OFF – – – – – –
FORCED AIR – X X X X X
CONVENTIONAL
(Top and Bottom Heat)
– X X X X X
CONVECTION BAKE – X X X X X
MAXI COOKING – X X X X X
GRILL GRILL – level 1-2-3 X X –
GRILL TURBO GRILL – level 1-2-3 X X X
BREAD BREAD X X X – –
BREAD PIZZA X X X – –
SPECIALS
ECO
FORCED AIR*
– X X X X
SPECIALS DEFROST – – X X –
SPECIALS WARM KEEPING – 65° X X –
SPECIALS RISING – 30° 35° 40° X X –
FAST PREHEAT – X X X – –
PYRO-CLEANING PYRO – – 120 min X –
PYRO-CLEANING PYRO-ECO – – 75 min X –
IMPORTANT: Remove all accessories before running the pyrolysis function. To assure a better
cleaning results of the bottom of the oven.