IKEA BARMHARTIG User Manual (English)

Other manuals for IKEA BARMHARTIG

Manual36 pages

User Manual52 pages

Questions and Answers:

B
benjamin58Aug 12, 2025
What to do if my IKEA Hob cannot be activated?
- S
  Sarah CarterAug 12, 2025
  If your IKEA Hob isn't turning on or working, here's what to check: * Make sure the hob is properly connected to the electrical supply, referring to the connection diagram. * If more than 10 seconds have passed since you tried to turn it on, try activating it again. * Check if the Child Safety Device is activated and, if so, deactivate it. * Ensure you're only touching one symbol at a time on the control panel.
C
Christina WilliamsAug 16, 2025
What to do if my IKEA BARMHARTIG Hob cannot be activated or is not operating?
- A
  ashleytaylorAug 16, 2025
  If your IKEA Hob isn't activating or operating, here are a few things to check: * Ensure the hob is correctly connected to the electrical supply, referring to the connection diagram. * If more than 10 seconds have passed since you tried to activate it, try activating it again. * Check if the Child Safety Device is on and, if so, deactivate it. * Make sure you are only touching one symbol at a time.
M
Ms. Samantha CampbellAug 20, 2025
How to fix no signal when I touch panel symbols on my IKEA BARMHARTIG Hob?
- K
  kylenelsonAug 20, 2025
  If your IKEA Hob isn't responding when you touch the panel symbols, it could be that the signals are deactivated. You should activate the signals again, referring to the OffSound Control section for instructions.
T
Tammy GreenAug 25, 2025
What to do if the residual heat indicator is not displaying anything on my IKEA BARMHARTIG?
- C
  Christopher ConwayAug 25, 2025
  If the residual heat indicator on your IKEA Hob isn't showing, it could be because the cooking zone was only on for a short period and hasn't gotten hot enough. If you believe the cooking zone should be hot, contact After Sales Service.
D
David FlemingAug 27, 2025
What to do if there is no signal when I touch panel symbols on my IKEA BARMHARTIG?
- C
  Christine JenkinsAug 28, 2025
  If you're not getting any signal when you touch the panel symbols on your IKEA Hob, the signals may be deactivated. You should activate the signals. Refer to OffSound Control.
R
Rebecca ClineAug 30, 2025
Why does a symbol plus a number appear on my IKEA BARMHARTIG Hob power setting display?
- R
  Ryan SpencerAug 31, 2025
  If you see a symbol plus a number on the power setting display of your IKEA Hob, it indicates an electronic component error. To resolve this, disconnect the hob from the electrical supply for a few minutes. Remove the fuse, wait one minute, and then reinsert the fuse.
R
Ryan SalazarSep 3, 2025
Why does the light come on the power setting display on my IKEA BARMHARTIG?
- D
  Daniel JacksonSep 4, 2025
  If the light is on the power setting display of your IKEA Hob, it means the second phase of the power supply is missing. Verify that the hob is correctly connected to the electrical supply. Remove the fuse, wait one minute, and then reinsert it.
T
todd17Sep 7, 2025
Why is the residual heat indicator not displaying anything on my IKEA BARMHARTIG Hob?
- R
  Rachel CruzSep 8, 2025
  The residual heat indicator might not display anything because the cooking zone was only on for a short time and hasn't gotten hot enough. If you believe the cooking zone should be hot, contact the After Sales Service.