What to do if my IKEA FORDELAKTIG displays error E/6?
The E/6 error indicates deviations in the mains power supply frequency or voltage. Solar-powered inverters can cause this if they create a ripple on the mains voltage. The error should disappear once the mains power supply returns to normal.
What does ER 03 and continuous tone mean on my IKEA Hob?
The ER 03 error with a continuous tone on your IKEA Hob indicates continuous sensor activation, likely caused by water or cookware on the glass over the control panel. Remove any water or cookware from the glass and control panel, and then turn off the hob.
What does ER47 mean on my IKEA FORDELAKTIG Hob?
The ER47 error indicates an error in connecting the power cable on the product side. Disconnect the hob from the power supply and adjust the power supply connection according to the “ELECTRICAL CONNECTION“ paragraph, paying special attention to the correct fixation of the shunts on the product side.
What should I do if my IKEA Hob extractor control panel shows ER 03 and continuous tone?
The ER 03 error with a continuous tone on the extractor control panel of your IKEA Hob indicates continuous sensor activation, likely caused by water or cookware on the glass over the control panel. Remove any water or cookware from the glass and control panel, then touch the control panel of the extractor again.
What to do if my IKEA FORDELAKTIG Hob displays errors ER20 ER22 ER30 ER36 ER39 U400 E/2 E/A E/4 E/7 E/8 E/9?
Disconnect the hob from the power supply. Wait a few seconds, then reconnect the hob to the power supply.
To Next Page
General
