IKEA HYGIENISK - Basic Settings

For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Basic settings
You can congure the appliance by changing
basic settings according to your needs.
Number Setting Values Factory
setting
Description
1)
1 Water hardness 1L - 10L 5L Adjust the level of the water softener
according to the water hardness in
your area.
2 Rinse aid empty
notication
1d (on) / 0d
(o)
1d Activate or deactivate the rinse aid indi‐
cator.
3 End sound 1b (on) / 0b
(o)
0b Activate or deactivate the acoustic sig‐
nal for the end of a programme.
4 Auto door open 1o (on) / 0o
(o)
1o Activate or deactivate the AutoOpen.
5 Key tones 1F (on) / 0F
(o)
1F Activate or deactivate the sound of the
buttons when pressed.
6 Latest pro‐
gramme selec‐
tion
1H (on) /
0H (o)
0H Enable or disable the automatic selec‐
tion of the most recently used pro‐
gramme and options.
7 Display on oor 1C (on) / 0C
(o)
1C Activate or deactivate the TimeBeam.
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode. Instructions on how to congure the
appliance are provided further in this
chapter.
When the appliance is in setting mode, the
display shows a digit and a letter. For each
setting, a dedicated letter is displayed. The
dedicated letters are indicated in the table.
The order of the basic settings presented in
the table is also the order of the settings in
setting mode.
The water softener
The water softener removes minerals from
the water supply, which would have a
negative eect on the washing results and
on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness is
measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water in
your area. Set the right level of the water
softener to assure good washing results.
ENGLISH 12