IKEA HYGIENISK - Page 23

5
D
Put the at lter (A)
back in place. Make
sure that it is
correctly positioned
under the 2 guides
(D).
6
Reassemble the
lters (B) and (C). Put
them back in the
lter (A). Turn the
handle clockwise
until it locks.
An incorrect position of the lters
can cause bad washing results
and damage to the appliance
Cleaning the lter of the inlet hose
1
Close the water tap.
2
A
Disconnect the hose.
Turn the fastener A
clockwise.
3
Clean the lter of
the inlet hose.
4
Cleaning the lower spray arm
We recommend to clean the lower spray arm
regularly to prevent soil from clogging the
holes. Clogged holes can cause
unsatisfactory washing results.
1
To remove the lower
spray arm, pull it
upwards.
2
Wash the spray arm
under running
water. Use a thin
pointed tool, e.g. a
toothpick, to remove
particles of soil from
the holes.
3
To install the spray
arm back, press it
downwards.
Cleaning the upper spray arm
Do not remove the upper spray arm. If the
openings in the spray arm are clogged,
remove the remaining particles of soil with a
thin pointed object, e.g. a toothpick.
Cleaning the ceiling spray arm
We recommend to clean the ceiling spray
arm regularly to prevent soil from clogging
the holes. Clogged holes can cause
unsatisfactory washing results.
ENGLISH
23