Small indentation at the top
increase safety. The indentations
are also anti-tip devices. The
high rim around the shelf
prevents cookware from slipping
of the shelf.
Core temperature sensor
There are two temperatures to be set: the
oven temperature and the core
temperature.
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the oven
turns off.
Caution! Only use the core
temperature sensor supplied or
the correct replacement parts.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
1. Put the tip of the core temperature
sensor into the centre of the meat.
2. Put the plug of the core temperature
sensor into the socket at the front of the
oven.
3. Turn on the oven.
The display shows the core temperature
sensor symbol.
4. Press
or in less than 5 seconds to set
the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The oven calculates an approximate end
time. The end time is different for the
different quantities of the food, the set oven
temperatures (minimum 120 °C) and the
operating modes. The oven calculates the
end time in approximately 30 minutes.
6. To change the core temperature, press
.
When the meat is at the set core
temperature, a signal sounds. The oven
turns off automatically.
7. Press any symbol to stop the signal.
8. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.
9. Press
to turn off the oven.
Warning! The core temperature
sensor is hot. There is a risk of
burns. Be careful when you
remove the tip and the plug of
the core temperature sensor.
ENGLISH 19
To Next Page
Loading...
Need help?
General
