7. When the set time ends, a signal sounds
for 2 minutes. The Microwave function
turns off automatically. Press any symbol
to stop the signal.
To turns off the Microwave
function, press .
If you press or open the door,
the function stops. To start it
again, press .
Setting the Combi function
1. Remove microwave bottom glass plate.
2. Turn on a heating function. Refer to
"Setting a heating function".
3. Press and do the same steps as when
you set the Microwave function.
For some functions the
microwave will start as soon as
the set temperature is reached.
Functions not available for the Combi
function: Favourites, End Time, Set + Go,
Heat + Hold.
Setting the Microwave Quick Start
function
1. If necessary, press to turn off the
oven.
2. Press
to turn on the Quick Start
function.
Each press of adds 30 seconds to the
Duration time.
You can change the microwave
power (refer to "Setting the
Microwave function").
3. Press to set the time for the function:
Duration. Refer to "Clock functions"
chapter, Setting the clock functions.
Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar shows
that the temperature increases. When
temperature is reached the buzzer sounds 3
times and the bar flashes and then
disappears.
Fast Heat Up
This function decreases the heat-up time.
Do not put food in the oven when
the Fast heat up function works.
To turn on the function, hold for 3
seconds. The heat-up indicator alternates.
This function is not available for some oven
functions.
Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
ENGLISH
17
To Next Page
Loading...
