What to do if my IKEA LAGAN FC223/92 Dishwasher doesn't drain the water?
If your IKEA Dishwasher isn't draining water, ensure that the sink spigot is not clogged and that the drain hose has no kinks or bends.
Why is the IKEA Dishwasher door difficult to close?
If your IKEA Dishwasher door is difficult to close, make sure that the appliance is level by loosening or tightening the adjustable feet (if applicable). Also, ensure that parts of the tableware are not protruding from the baskets.
Why does my IKEA LAGAN FC223/92 Dishwasher keep stopping and starting?
It is normal for the IKEA Dishwasher to stop and start frequently during operation. This provides optimal cleaning and energy savings.
How to fix an IKEA Refrigerator door that doesn't close?
If your IKEA Refrigerator door won't close completely, check that the shelves are correctly positioned. Also, make sure to clean the door gaskets. Finally, ensure the refrigerator is level.
Why are there traces of rust on cutlery in my IKEA LAGAN FC223/92?
If you notice traces of rust on cutlery in your IKEA dishwasher, it might be due to too much salt in the water. Also, avoid placing silver and stainless steel cutlery together.
What does F111 mean on my IKEA Oven display?
If your IKEA oven display shows F111, the plug of the core temperature sensor is not correctly installed into the socket. Put the plug of the core temperature sensor as far as possible into the socket.
Why is there unusual foam during washing in my IKEA LAGAN FC223/92?
If you notice unusual foam during washing in your IKEA dishwasher, use detergent specifically designed for dishwashers. There may also be a leak in the rinse aid dispenser, in which case you should contact an Authorised Service Centre.
Why is my IKEA Ventilation Hood suction not enough?
If your IKEA Ventilation Hood's suction is weak, there are a few things you can check. First, make sure the suction speed isn't set too low and adjust it accordingly. Also, inspect the metal filters to ensure they are clean; if they're dirty, clean them in the dishwasher. Finally, check the air vents for any obstructions and clear them if necessary.
Why does the IKEA LAGAN FC223/92 programme lasts too long?
If your IKEA dishwasher programme lasts too long, check if the delay start option is set. If it is, cancel the delay or wait for the countdown. Also, activating the Power Clean option increases the programme duration.
Why am I getting poor drying results from my IKEA LAGAN FC223/92 Dishwasher?
If you are getting poor drying results from your IKEA dishwasher, it could be because tableware was left inside for too long. Ensure there is enough rinse aid and that its quality is good. Always use rinse aid, even with multi-tablets. Note that plastic items may need towel drying, and some programmes may lack a drying phase.
General| Type | Freestanding |
|---|---|
| Width | 60 cm |
| Energy efficiency class | F |
| Number of place settings | 12 |
| Height | 85 cm |
| Depth | 60 cm |
| Child lock | Yes |
| Delay start | Yes |
To Next Page