Why won't the program start on my IKEA LAGAN S?
If the program on your IKEA Dishwasher won't start, first ensure that the appliance door is fully closed. Also, the appliance may be in the process of recharging the resin inside the water softener, which can take approximately 5 minutes.
Why does the IKEA LAGAN S Dishwasher door open during the wash cycle?
The door of your IKEA Dishwasher might open during the wash cycle because AutoOpen is activated. This function opens the appliance door during the drying phase to improve drying performance and cool the dishes. If you don't want the door to open automatically, deactivate AutoOpen. Refer to "Settings".
Why are there whitish streaks on dishes from IKEA Dishwasher?
If you notice whitish streaks or bluish layers on glasses and dishes from your IKEA Dishwasher, the released quantity of rinse aid or detergent may be too high. Adjust the rinse aid level to a lower setting and reduce the quantity of detergent used.
Why does the lamp not operate in my IKEA Oven?
If the lamp in your IKEA Oven isn't working, it's likely that the lamp is defective and needs to be replaced.
How to fix F111 error on IKEA Oven?
If you see 'F111' on the display of your IKEA Oven, it means the plug of the core temperature sensor isn't fully inserted into the socket. To fix this, push the plug of the core temperature sensor as far as it can go into the socket.
What does F111 mean on my IKEA Oven display?
If your IKEA oven display shows F111, the plug of the core temperature sensor is not correctly installed into the socket. Put the plug of the core temperature sensor as far as possible into the socket.
Why is the lamp turned off in IKEA Oven?
If the lamp in your IKEA oven is off, it might be due to the ECO Cooking function being enabled. This is normal behavior when using the ECO Cooking function.
Why does my IKEA LAGAN S Dishwasher door not close completely?
If the door of your IKEA Dishwasher isn't closing completely, check that the shelves are in the correct position. Clean the door gaskets. Also, ensure the appliance is level.
Why is there no spark when lighting my IKEA Hob?
If there is no spark when lighting the gas on your IKEA Hob, first, ensure the unit is properly plugged in and that the electrical supply is switched on. Next, check the house electric installation fuse. Finally, verify that the burner cap and crown are placed correctly.
Why is there rust on the cutlery after using my IKEA LAGAN S?
If you find traces of rust on cutlery after using your IKEA Dishwasher: * There may be too much salt in the water used for washing. Refer to "The water softener". * Silver and stainless steel cutlery may have been placed together. Do not put silver and stainless steel items close together.
General| Standard place settings | 13 |
|---|---|
| Place settings | 13 |
| Programs | 6 |
| Child lock | Yes |
| Delay start | Yes |
To Next Page
