What to do if...
Warning! Refer to Safety chapters.
What to do if...
Fault Possible Cause Notes/remedy
The appliance does not
work.
Faulty fuse. Check the circuit breaker in the fuse box.
Power cut. Check whether the kitchen light or other
kitchen appliances are working.
Knobs have fallen out of
the support in the control
panel.
Knobs have been
acci- dentally disengaged.
Knobs can be removed. Simply place knobs
back in their support in the control panel
and push them in so that they engage and
can be turned as usual.
Knobs can no longer be
turned easily.
There is dirt under knobs Knobs can be removed. To disengage knobs,
simply remove them from the support.
Alternatively, press on the outer edge of
knobs so that they tip and can be picked up
easily. Carefully clean the knobs using a cloth
and soapy water. Dry with a soft cloth. Do
not use any sharp or abrasive materials. Do
not soak or clean in the dishwasher. Do not
remove knobs too often so that the support
remains stable.
Fan does not work all the time in the mode: “Fan
Heating”
This is a normal operation due to the best
possible heat distribution and best possible
performance of the oven.
After a cooking process a noise can be heard and a air
flow in thenear of the control panel can be observed.
The cooling fan is still working, to prevent
high moisture conditions in the cavity and
cool down the oven for your convenience.
The cooling fan will switch off automatically.
The food is not suffcient cooked in the time given by
the recipe.
A temperature different from the recipe is
used. Double check the temperatures. The
ingredient quantities are dierent to the recipe.
Double check the recipe.
Uneven browning The temperature setting is too high, or the
shelf level could be optimized.
Double check the recipe and settings. The
surface finish and or color and or material
of thebaking ware were not the best choice
for the select-ed oven function. When use
radiant heat, such as “Top & Bottom Heating”
mode, use matt finished,dark colored and
light weighted oven ware.
The lamp doesn’t turn on The lamp needs to be replaced.
ENGLISH
To Next Page
Loading...
