IKEA MOJLIG User Manual (English)

Other manuals for IKEA MOJLIG

Manual44 pages

User Guide28 pages

Questions and Answers:

R
Rachel ZimmermanAug 21, 2025
Why is my IKEA Cooktop not turning on?
- S
  sarahaguilarAug 21, 2025
  If your IKEA Cooktop isn't turning on, there might be a few reasons. First, ensure it's properly connected to the electrical supply, referring to the connection diagram for correct setup. If more than 10 seconds have passed since you last tried, try switching it on again. Also, check if the Child Safety Device or Lock is activated and deactivate it if necessary. Finally, make sure you're only touching one sensor field at a time.
U
ularsonAug 23, 2025
Why is my IKEA Hob not turning on?
- T
  timothypageAug 23, 2025
  Your IKEA Hob might not be turning on due to several reasons: it's not correctly connected to the electrical supply (check the connection diagram), more than 10 seconds have passed since you tried to activate it (try again), the Child Safety Device or Lock is activated (deactivate it), or you touched several symbols at the same time (touch only one).
L
Loretta ThompsonAug 25, 2025
Why is there no spark when lighting my IKEA MOJLIG Hob?
- R
  Richard HallAug 25, 2025
  If there is no spark when lighting the gas on your IKEA Hob, first, ensure the unit is properly plugged in and that the electrical supply is switched on. Next, check the house electric installation fuse. Finally, verify that the burner cap and crown are placed correctly.
G
gmoralesAug 27, 2025
What to do if the flame is extinguished immediately after lighting IKEA Hob?
- M
  Michelle GarciaAug 27, 2025
  If the flame on your IKEA Hob is extinguished immediately after lighting, it is likely that the thermocouple is not heated enough. To resolve this, after lighting the flame, keep the knob pushed for about 5 seconds.
C
Cynthia BlevinsAug 27, 2025
What to do if the IKEA Hob residual heat indicator is not working?
- R
  rjensenAug 28, 2025
  If the residual heat indicator on your IKEA Hob isn't displaying anything, it could be because the cooking zone was only on for a short time and isn't hot enough. If the cooking zone is supposed to be hot, call the After Sales Service.
R
Robert WilliamsAug 29, 2025
What to do if overheating protection lights up on IKEA Cooktop?
- K
  kellyfinleyAug 29, 2025
  If the overheating protection activates on your IKEA Cooktop, switch off the appliance and remove the hot cookware. Wait about 30 seconds, then switch the cooking zone on again. The symbol should disappear, though the residual heat indicator might remain. Allow the cookware to cool down, and then verify its suitability using the 'Cookware for the induction cooking zones' section guidelines.
B
brandonyangAug 31, 2025
Why does my IKEA Cooktop beep and switch off?
- P
  patrickharperAug 31, 2025
  If your IKEA Cooktop is beeping and switching off, it's likely that one or more of the sensor fields have been covered for more than 10 seconds. Uncover the sensor field to resolve this issue.
J
Jimmy McgrathSep 1, 2025
What does 'Unsuitable cookware' mean on IKEA Cooktop?
- L
  lorettafernandezSep 1, 2025
  If you see 'Unsuitable cookware' displayed on your IKEA Cooktop, it means the cookware you're using isn't appropriate. You should use suitable cookware.
M
Mrs. Jennifer CherrySep 3, 2025
What does symbol plus number on IKEA Cooktop mean?
- S
  stewartmatthewSep 3, 2025
  If you see a symbol plus a number on the display of your IKEA Cooktop, it indicates an electronics fault. Disconnect the appliance from the electrical supply for a few minutes by removing the fuse from your home's electrical system. If the symbol reappears after switching it back on, call After Sales Service.
M
mhamiltonSep 4, 2025
Why does my IKEA Cooktop show no cookware?
- C
  charlene12Sep 4, 2025
  If the heat setting display lights up indicating no cookware is detected on the cooking zone of your IKEA Cooktop, it simply means there's no cookware present. Make sure to place cookware on the cooking zone.