Lamp Power (W) Socket Voltage (V) Dimension ILOCOS Code
4 E14 220-240 107 x 37
DRBB/F-4-220-
240-E14-35/100
What to do if…
If there is a fault, first try to find a solution to the problem yourself. If you can not find a solution to the problem yourself, contact an authorized service center.
If you operated the appliance wrongly, or the installation was not carried out according to the Assembly instructions, the visit from the Authorized Service Centre technician may
not take place free of charge, even during the warranty period.
PROBLEM POSSIBLE CAUSE SOLUTION
Appliance not stable The appliance is not correctly installed Follow the Installation instruction enclosed to the appliance.
Appliance is not in a horizontal position The appliance is not correctly installed Follow the Installation instruction enclosed to the appliance.
Performance in terms of oil capture are not satisfying Oil and grease on metal filters or charcoal filters. Follow the cleaning frequency as described in the user manual
Appliance does not work The appliance is not correctly connected
Verify that the main cable is connected to the motor group or the
plug is connected to the socket
The light does not work The LED is broken
You can replace the lamp without contact the Authorized Service
Centre.
Noise of the hood is higher than customer expectations.
The air outlet diameter in the wall is too small, causing a
pressure drop and an increase in motor speed.
Follow the Installation instruction enclosed to the appliance.
Product is installed in recirculation mode.
Product in recirculation mode(and using a charcoal filter) will
generate a higher noise than a product in extraction mode.
More than one bend in the ventilation duct.
If the exhaust system in the building has multiple bends in or a long
distance, this can increase the noise of the product.
Before contacting the Authorized Service Centre:
Switch the appliance on again to see if the problem has disappeared. If not, switch it off again and repeat the operation after an hour. If your appliance still does not work properly after
carrying out the checks listed in the troubleshooting guide and switching the appliance on again, contact the Authorized Service Centre, clearly explaining the problem and specifying:
the type of fault;
the model;
he types and a serial number of the appliance (given on the rating late).
Technical Data
Unit Value
Product Type Wall-mounted hood
Dimensions
Width mm 598
Depth mm 471
Exhaust Height min/max mm 630/995
Recirculating Height min/max mm 715/995
Airflow max* – Exhaust m3/h 400
Noise max* – Exhaust dBA 66
Airflow max* – Recirculating m3/h 190
Noise max* – Recirculating dBA 71
Total Power W 118
Lamps info
Type LED Bulb
Number & Power 2 x 4W
Socket E14
Installation minimum height – gas hob mm 650
Installation minimum height – elec hob mm 500
Net Weight Kg 6i4t
* Maximum speed (boost excluded).
This appliance has been designed, manufactured, and marketed in compliance with the E.E.C. Directives.
The technical information is situated in the rating plate on the internal side of the appliance.
To Next Page
Loading...
