30
EN
Your refrigerator includes a variety of
storage drawers.
Crispers are designed for storing fruits,
vegetables, and other fresh produce.
Crispers have an auto humidity control on
the back of each crisper under the humidity
control cover.
1. Remove any shelves placed above
the crisper cover, and then lift up and
remove the crisper cover from the unit.
2. Remove 3 screws on the bottom of
the crisper cover to release the auto
humidity cover.
3. Slide out the auto humidity cover from
the crisper cover to gain access to the
humidity membrane.
4. Clean the membrane with hot soapy water.
5. Replace the membrane and cover by
reversing the steps above.
NOTE
We do not recommend replacing the auto-
humidity membrane unless it becomes
damaged or ruined. If the membrane
becomes soiled, washed it with soap and
water. Ensure the membrane is dry before
replacing it in unit.
STORAGE FEATURES
To Next Page
Loading...
