IKEA STYRBAR - Product Control and Setup; Remote Control Functions; Adding Devices to Remote Control

4
English
REMOTE CONTROL FUNCTIONS
Short press to turn on. To dim up,
press and hold the button.
Short press to turn o. To dim down,
press and hold the button.
Change white spectrum, colours or
scenes.
Pairing: Add IKEA Smart Lighting
products to your system. See
instructions below.
ADDING DEVICES TO YOUR
REMOTE CONTROL
When the remote control is sold
together with a light source (in the same
package), they are already paired. If the
remote control is purchased separately,
you must manually pair it to your light
source.
To add light sources, just repeat the
steps below.
1. Make sure that your light source is
installed and the main power switch
is turned on.