Problem Possible cause Remedy
The oven does not heat up. The necessary settings are
not set.
Make sure that the settings
are correct.
The oven does not heat up. The fuse in the fuse box is
released.
Do a check of the fuse. If the
fuse is released more than
one time, contact a qualified
electrician.
The oven lamp does not op-
erate.
The oven lamp is defective. Replace the oven lamp.
The display shows F11. The core temperature sensor
has a short-circuit or the
core temperature sensor
plug is not tightly in position
in the socket.
Insert the core temperature
sensor plug as far as it goes
into the socket on the front
of the appliance.
The display shows 12.00. There was a power cut. Set the clock.
Steam and condensation
settle on the food and in the
oven.
You left the dish in the oven
for too long.
Do not keep the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing ends.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the appli-
ance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Technical data
Dimensions (internal) Height top: 212 mm/ main: 368 mm
Width top: 440 mm/ main: 435 mm
Depth top: 448 mm/ main: 409 mm
Usable volumes (top oven) 42 l
Usable volumes (main oven) 61 l
Area of baking tray 1175 cm²
Top heating element (top oven) 1200 W
Top heating element (main oven) 1000 W
ENGLISH 17
To Next Page
Loading...
