To Next Page

To Previous Page

hipot.com 51

Test Parameter Editing Commands

These commands are used to modify the test parameter within each memory. These commands require a parameter value

to be included with the command. The companion query command will read the parameter. The writing of the parameter

requires that the unit not be included with the value, only the numeric value should be included with the command. Also when

the query commands are used the response will not include the units characters. Many of the commands will function the same

way for multiple test types however the input range may be dierent and therefore used a dierent possible set of values.

Command Name Test Types Values

EV <value>

EV?

Edit Voltage ACW

DCW

0.00 – 5.00 (kV)

0.00 – 6.00 (kV)

100 – 1000 (V)

EH < value >

EH?

Edit HI-Limit ACW

DCW

0.10 – 12.00 (mA)

0.02 – 5.00 (mA)

0, 1- 1000 (MΩ)

0 = O

EL < value >

EL?

Edit LO-Limit ACW

DCW

0.10 – 12.00 (mA)

0.02 – 5.00 (mA)

0, 1- 1000 (MΩ)

0 = O

ERU < value >

ERU ?

Edit Ramp ACW

DCW

0.2 – 180.0 (sec)

.1, 2.0 (sec)

EDW < value >

EDW?

Edit Dwell ACW

DCW

0.0, 0.2 – 60.0s

0.0 = Continuous

EDE < value >

EDE?

Edit Delay IR 0.0, 0.5 - 999.9s

0.0 = Continuous

ECT {1|0}

ECT?

Edit Continuity ACW

DCW

1=On, 0=O

ECH < value >

ECH?

Edit Continuity HI-Limit ACW

DCW

0.00 – 1.50 (Ω)

ECL < value >

ECL?

Edit Continuity LO-Limit ACW

DCW

0.00 – 1.50 (Ω)

ECO < value >

ECO?

Edit Continuity Oset ACW

DCW

0.00 – 0.50 (Ω)

EF {1|0}

EF?

Edit Frequency ACW 1=60 Hz, 0=50 Hz

ECC {1|0}

ECC?

Edit Connect ACW

DCW

1=On, 0=O

Brand	IKONIX
Model	SCI 290 Series
Category	Test Equipment
Language	English

IKONIX SCI 290 Series User Manual

Table of Contents

Questions and Answers:

IKONIX SCI 290 Series Specifications

Related product manuals