IKONNIK ET4 - Introduction

5
R/C models are an extremely fun hobby, but safety should never be ignored
or taken lightly. Always take caution when operating your model as damage
to property and injury can result from careless operation. Please consult
your local hobby dealer with any questions or troubleshooting issues. And
of course don’t forget to have fun, you deserve it after reading through all of
these safety tips!
Introduction
The IKONNIK ET4 transmitter was engineered with great ergonomics
for ultimate comfort and to allow its use by the most people possible.
While being packed with high-end software functions is great; if you
can’t physically use the transmitter or if it is uncomfortable, what good
will the technology bring you? Understanding this dilemma we began the
development of the ET4 with the physical needs of the users in mind. The
transmitter is congurable for use by left-or right-hand users of most hand
sizes. Included are 3pcs of rubber grips that can be changed to suit your
hand size. These were designed to t the small hands of children and also
the larger hands of adults. The Wheel module can be ipped from side
to side and repositioned fore or aft for comfort or placed up high. A
wheel installed in a lower position is best for ergonomics and
synchronization of your hands. The ideal position for your
hands is to have your wrists comfortably aligned both
in height and distance from your body while holding
the transmitter. The ET4 provides many options
to congure the wheel position to best suit
your body. The default conguration is the
most common and a good place to start.
We highly recommend conguring your
radio system prior to making changes to
the wheel position or placement. This
will enable you to conrm the proper
function and help with troubleshooting
should any issues arise after making a
physical change. See the appendices at the
back of this manual for assistance in adjusting
the ergonomics of your new transmitter.
Ready to expand your collection? The IKONNIK
ET4 is equipped with our proprietary 2.4GHz
Xenon protocol. This means that any
product containing the IKONNIK Xenon
logo will easily pair with one of the
models of your radio. No more need
to take multiple transmitters with you
when one will do.