EasyManua.ls Logo

Ikra BHT 60 - Page 41

Ikra BHT 60
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATING MANUAL
GB
GB-2
such cases the operator will require
noise protection (e.g. wearing of
ear protectors).
B3.2 Wear a safety helmet in ar
eas where objects are likely to fall.
B4 Wear sturdy shoes with non
slip soles.
B5 Wear sturdy gloves
B6 - HEDGETRIMMER users must
be in good physical condition.
DO NOT USE the machine if you
feel tired, ill or are under the inu-
ence of alcohol or other drugs.
B7 - CAUTION! Exhaust fumes are
toxic and asphyxiating. If inhaled,
these fumes may even be lethal.
Do not start the engine in closed or
poorly ventilate environments.
B8Prolonged use of the machine
may hinder blood circulation to the
hands (Raynaud’s phenomenon)
due to vibrations.
The following factors may pose a
risk to the operators health:
- Operator is predisposed to poor
blood circulation in the hands.
- The machine is used in cold
weather (warm gloves are strongly
recommended).
- The machine is used non-stop for
long periods (we suggest using it
at intervals).
- If you feel a tingling sensation or
numb in any way, please seek me-
dical attention.
B8.1 Always hold the machine
with both hands.
Stand in a safe and steady position
on both legs. Stay balanced. Do
not use on unstable ladders. To
cut tall hedges, a stable scaffold is
recommended.
B9 - CAUTION! Petrol and its va-
pours are highly ammable.
BURNING AND FIRE HAZARDS
B9.1 Stop the engine before
refuelling.
B9.2 Do not smoke while refu-
elling.
B9.3 Wipe off any fuel that may
have spilled. Start up the engine
away from the place where it was
refuelled.
B9.4 Make sure the tank cap is
tightened properly.
Beware of any leaks.
B10 - SAFETY DEVICES
B10.1 - the THROTTLE LEVER
LOCK (see g.1 part. 4) prevents
the accidental use of the throttle
control lever.
B10.2 - the ENGINE CUT-OFF
SWITCH (ON/OFF) stops the engi-
ne (g. 1 part. 3).
DANGER! Caution! The cutting
blade continues to spin for a while
even after the power switch has
been shut “OFF”.

Related product manuals