iLight SCI1210 - User Manual

Contents
2 Warning
3 Installation
5 Supply and load connections
7 iCAN Network
8 ASCII control messages
9 Typical system schematics
10 Service switches and LEDs
12 Specifications
- Inductive
- H F Ballast
- Power Switching
- Adaptive
- Trailing Edge
Instruction Manual
Read this document prior to installation
Source Controllers
INTELLIGENT CONTROLS

iLight SCI1210 Specifications

General

Brand	iLight
Model	SCI1210
Category	Controller
Language	English

Summary

Safety and Compliance

Hazardous Voltage and Handling Precautions

Critical safety alerts regarding electrical hazards and proper device handling.

CE Marking and Technical Standards

Information on product compliance with relevant safety and technical standards.

Installation Instructions

Controller Placement and Ventilation

Guidelines for optimal location, airflow, and mounting of controllers.

Supply and Load Connections

Detailed instructions for connecting power supply and load cables.

Cable Termination and Wiring

Specifics on terminating mains, load, and earth supply cables.

Additional Connection Types

System Communication

iCANnet and RS485 Network Setup

System Control

ASCII Control Message Protocol