EasyManua.ls Logo

iLive IC308B - Page 11

iLive IC308B
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Control Denitions
11
2 Projection Display
The Projection Display projects the time onto wall.
3 Dock for iPod
Use the Dock for iPod to dock an iPod onto the unit.
4 Standby/AL Off Button
Press the Standby/AL Off Button to turn the unit off and on.
Press the Standby/AL Off Button after an alarm sounds to turn the alarm off.
5 Volume Buttons
Press the Volume Buttons to adjust the volume of the unit.
6 Mem Set/AL 1
Press the Mem Set/AL 1 Button to save a radio station to the unit’s memory.
Press the Mem Set/AL 1 Button to set alarm 1.
7 Snooze/Display
Press the Snooze/Display Button after the alarm sounds to delay the alarm for an additional 9 minutes.
Press the Display Button to toggle between the radio frequency view and the clock view.
8 Function Button
Press the Function Button to switch between iPod, Radio, Aux and NS mode.
9 Clock Adj/Sleep Button
Press the Clock Adj/Sleep Button to set the clock.
Press the Clock Adj/Sleep Button to set the sleep timer between 10-90 minutes in 10 minute increments.
10 Tune/Skip/Search Buttons
Press the Tune/Skip/Search Buttons to tune the radio.
Press the Tune/Skip/Search Buttons to skip between tracks on a docked iPod.
Press and hold the Tune/Skip/Search Buttons to search through an individual track on a docked iPod.
11 Stop/Band Button
Press the Stop/Band Button to stop an iPod during play.
Press the Stop/Band Button to switch between AM and FM in radio mode.
12 Play/Pause/Nature Sounds Button
Press the Play/Pause/Nature Sounds Button to play or pause a docked iPod.
Press the Play/Pause/Nature Sounds Button to cycle through the nature sounds.
13 Mem Up/AL 2 Button
Press the Mem Up/AL 2 Button to cycle up through the saved radio stations.
Press the Mem Up/AL 2 Button to set alarm 2.
14 Dimmer/Projecter Button
Press the Dimmer/Projector Button to dim the LCD Display.
Press and hold the Dimmer/Projector Button to activate the Projection Display.
15 Reset
Press the RESET button to reset the unit to it’s default factory settings.

Related product manuals