iLive IC308B - Setting the Clock

Setting the Clock
6
1. Press the Standby/AL Off Button to turn the unit off.
2. Press and hold the Clock Adj/Sleep Button until the hour begins to ash on the
LCD Display.
3. Press the Skip/Search Buttons to adjust the hour.
4. Press the Clock Adj/Sleep Button to set the hour, and the minute will begin to
ash on the LCD Display.
5. Press the Skip/Search Buttons to adjust the minute.
6. Press the Clock Adj/Sleep Button to set the minute.
Using the Projection Display
1. Press the Standby/AL Off Button to turn the unit on.
2. Press and hold the Dimmer/Projector Button to activate the Projection Display.
3. Turn the Focus Dial to focus the light coming from the Projection Display.
The unit will need to be relatively close to a wall or surface for the projected time
to be readable.