iLive IJMB485B - Bluetooth & aux in; Pairing a Bluetooth Device for the First Time; Playing Audio Wirelessly; Using the aux in

Customer Support: 1-888-999-4215 11
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Set the Source Switch on the front of the unit to and press and hold the Pair button.
The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit.
3. Using the native controls on your Bluetooth device, select the IJMB485 in your Bluetooth settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
4. When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator will
display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.
Playing Audio Wirelessly
1. After pairing to a bluetooth device, use the native controls on the connected Bluetooth Device to
select a track.
2. Play, pause or skip a selected track using the native controls on the connected Bluetooth Device or the
controls on the karaoke machine.
3. Audio played through the connected Bluetooth device will now be heard through the speakers.
Bluetooth & Aux In
Using the Aux In
3.5 mm audio input cable not included.
1. Plug one end of a 3.5 mm audio input cable into the Aux In input on the front of the unit, and plug the other
end of the cable into the audio output on an MP3 Player or other audio source.
2. Press the Power button to power the unit on.
3. Set the Source Switch on the front of the unit to Aux In.
4. Audio played through the connected device will now be heard through the speaker.
O
N
O
F
F
P
A
I
R
POWER
EECCHH OO MIC 2 VO L
MIC 1 VO L
MIC 1 MIC 2
SOURCE
AUX IN
CD+G
CD
AUX IN