Bluetooth
Wireless
Pairing
&
Playing Audio
1.
Press the
Power
button to power on the under cabinet music system.
2.
Press the
Source
button to select
Bluetooth Mode.
The
8
pairing indicator
on the display will begin flashing.
3.
On your Bluetooth device, scan for and select
IKBC384SMP3U
in your Bluetooth settings to pair.
lfyour device
requests a password, enter the default password
0
0
0 0.
Refer to the user's manual for your specific device for
instructions on pairing and connecting Bluetooth devices.
When pairing, remain within
3
feet of the under cabinet music system.
4.
When successfully paired, the voice prompt will say "Bluetooth connected." Use the controls on your connected
device to select and begin playing audio.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you find
it
is
unable to connect, press and hold the
button
to
manually enter into pairing mode. A voice prompt will sayUBluetooth is connecting,~'you can then connect manually.
Speakerphone
1.
When a call
is
received, a ringtone will sound from the speaker.
2.
Press the button to accept the call, or accept the call using the controls on the connected phone.
3.
The incoming call received through the device will now be heard through the speaker
4.
To end the call, press the
fi
button or end the call using the controls on the connected phone.
To Next Page
Loading...
