IPHONE/IPOD AND RADIO
1 Press the POWER button to turn the bar
speaker on.
2 Press the SOURCE button to switch to
iPhone/iPod mode. (iPod button on the
remote)
3 Press the iPod DRAWER button to open the
MOTORIZED DOCK FOR iPhone/iPod.
4 Locate the numbered bracket that ts the
iPhone/iPod model that will be docked.
Each included bracket has a number on it,
indicating which iPhone/iPod model that
bracket is compatible with. See the separate
bracket chart page to identify which bracket
is needed.
5 Snap the bracket into place over the
iPhone/iPod connector in the motorized
dock.
6 Connect the iPhone or iPod to the
connector inside the Dock for iPhone/iPod.
When the speaker is plugged in, using AC
power, the docked iPhone or iPod will charge.
1 Press the POWER button to turn the bar
speaker on.
2 Press the SOURCE button to switch to FM
radio mode.
3 Press the SKIP/TUNE buttons on the
remote to tune the FM radio.
1 Follow the instructions for TUNING THE FM
RADIO.
2 Press the MEM button.
3 Press the MENU UP/DOWN for iPod
buttons to select a preset. (P01, P02, P03,
etc.)
4 After you’ve selected a preset, press the
MEM button to save the current FM radio
station to the selected preset.
1 Follow the instructions for TUNING THE FM
RADIO.
2 Follow the instructions for SAVING A
STATION AS A PRESET.
3 Press the MEMORY buttons on the remote
to cycle through preset radio stations.
Docking an iPhone/iPod Tuning the FM Radio
Saving a Station as a Preset
Tuning to a Preset FM Radio Station
Playing an iPhone/iPod
1 Follow the instructions for docking an
iPhone/iPod.
2 Press the PLAY/PAUSE button to begin
playing music from the docked iPhone or
iPod.
To Next Page
Loading...