illy SMART10 - Filling the Water Tank; Water Tank Fitting Warning

23
USER MANUAL
MACHINE USE
To fill the tank
• Pull the tank (8) out of the machine by lifting it, then remove
the cover. (Fig.1)
• Fill the tank until the indicated maximum level (MAX) is
reached. (Fig.2)
• Close the cover and insert the tank (8) against the machine
body in order for the latch to engage and the tank base to
rest correctly on the water valve. (Fig.3)
To avoid water leaks, make sure the tank has been fitted
correctly.
WARNING:
Fig. 1
Fig. 2
Fig. 3
8
8
8
8
8
8
8
8
8