EN
33
CAUTION: make sure that the capsule compartment is closed before set-
ting the selector knob to steam and/or activating steam or hot water, or ex-
tracting coffee. Never open the compartment during the delivery of steam,
hot water or coffee A
installation and start-up of espresso machine
Before connecting the machine to a power supply, carefully read the safeguards listed in the previous chapter
Install the cup stand (included in the package) on the top part of the machine; insert the feet in the holes and
press firmly
Remove the water tank by tipping top of tank slightly backwards first . Fill the tank with fresh drinking water until
the MAX mark is reached .
Insert the tank placing the back lower edge (curved) in place first and then tipping the tank forward
Make sure that the selector knob is in the central position
Insert the plug into the power socket. Consult the following chapter to switch on the appliance
CAUTION: always fill the tank with still fresh drinking water only. Hot water or
other liquids may damage the tank. Do not use the machine without water
1
2
3
4
5
6
N.B. We suggest keeping the original package (at least during the
warranty period) in case the machine needs to be sent to the technical
assistance center for repair
H
2
O
3
2
4
5
1
6
A
To Next Page
Loading...
