Iluv i1166 - USB, SD;MMC Playback and System Setup; USB, SD;MMC playback; System Setup; Helpful Tips on Choosing the Aspect Ratio

21 | iLuv
OPERATIONAL INSTRUCTIONS
USB, SD/MMC playback
1. The unit will automatically display the contents of the USB or SD/MMC on the screen while playing the
rst MP3 le. The les will be played one by one.
2. Press
, , or to select MP3, PICTURE or VIDEO le.
3. Press
, , or to view and select the desired audio les.
4. Press
to conrm.
5. You can press
to interrupt playback,
and press
again to resume playback.
System Setup
1. Press SETUP while in the Stop mode.
2. Press
or to select the option (TV TYPE, DIVX [R] VOD, DEFAULT) and press SELECT.
3. Press
, to adjust and press SELECT. The screen will change to your suggested setting.
4. Repeat steps 2 and 3 above to choose another option.
5. To reset all the settings to factory default settings, select the option “DEFAULT”.
6. To exit the SETUP MENU and return to a normal screen, press SETUP again.
Helpful Tips on Choosing the Aspect Ratio
1. About 4:3 PS
a. When wide-screen video is played, this mode crops the right and left sides o the image in order
that it can be viewed on a conventional screen.
b. Some wide-screen DVDs do not permit Pan Scan and playback is automatically in letterbox mode
(black bands on top and bottom).
2. About 4:3 LB
a. When wide-screen video is played in this mode on a conventional screen, black bands appear at
the top and bottom of the screen.