ILVE BC645 - Raw Fish and Thawing Programs

17
G
G
G
B
B
G
B
B
0°C PRESERVATION
Before starting It is possible to verify the information in the summary screen.
During the program The display shows the settings and the remaining time to the end of the program.
AT THE END OF THE PROGRAM
This program maintains a constant temperature of +1-3°C inside the appliance, until the intervention of the
user and for no longer that 36 hours. During this phase, the appliance automatically defrosts.
Raw fi sh
Incorrect storage of fi shery products may cause health risks in relation to contamination by Anisakis, a parasite
that can be eliminated by prolonged cooking or freezing processes. This program involves a special freezing
process lasting 24 hours at -30°C.
Warning! The manufacturer declines any responsibility arising from incorrect use of the appliance or
violation of the applicable rules for health and safety.
FRESH FISH
Before starting It is possible to verify the information in the summary screen.
During the program The display shows the settings and the remaining time to the end of the program.
AT THE END OF THE PROGRAM
The device beeps and displays an information message.
It then switches to preservation mode which maintains the temperature of -18°C inside the appliance until
the intervention of the user and for a maximum of 24 hours. During this phase, the appliance automatically
defrosts.
Thawing
This cycle brings foods from freezing temperature to +2°C without loss of liquids and without starting the co-
oking process, avoiding the protein processing that happens, for example, when defrosting meat in the micro-
wave.
THAWING
Options
Type of food: specify the type of food to be chilled.
Preparation: specify if the food on the tray is whole or in a different form (i.e.:
sliced, diced, in pieces, etc.).
Weight: select the quantity of food on the tray.
Before starting It is possible to verify the information in the summary screen.
During the program The display shows the settings and the remaining time to the end of the program.
AT THE END OF THE PROGRAM
The device beeps and displays an information message.
It then switches to preservation mode which maintains a temperature of +2°C inside the appliance until the
intervention of the user.
USER INSTRUCTIONS
Program tables