23
Inner liner cleaning
Internal cleaning of the liner is necessary to ensure the hygiene and quality of processed products, so after each
use it is recommended that you clean the appliance. The round shape of the internal parts and the arrangement
of the liner accessories are designed for easy cleaning, to be carried out with a soft cloth or non-scratch sponge
and neutral detergent.
Avoid steel wool, scrapers or abrasive, aggressive or acidic substances which could permanently damage the
stainless steel surfaces. After cleaning, rinse with warm water and dry thoroughly.
Inactivity periods
If the appliance is not being used for an extended period it is advisable to unplug it from the power supply and
thoroughly clean both inside and outside following the instructions in in the previous paragraphs. It is also advi-
sable to leave the door slightly open for the entire period of inactivity.
On fi rst reuse, perform the preliminary cleaning operations described on page 10.
Malfunctions (non-scheduled maintenance)
Maintenance and/or replacement of any part of the appliance must be carried out by qualifi ed and authorized
technicians. Maintenance and/or replacement must be performed by qualifi ed and authorized technicians for the
lighting system as well.
Note: in case of any malfunction, before calling the support service, make sure the power cable is correctly
plugged in and that there is power. If the malfunction persists, call the support service communicating:
• the data on the data label applied on the side of the appliance (Label data, fi g. 4);
• the date of purchase;
• any visible alarm code on the display.
Note: any attempt to change or repair the appliance will void the warranty. Rely on qualifi ed and authorised
technicians only.
Alarm table
CODE DESCRIPTION ACTION
AS1 Faulty inner liner probe Call the Service Centre for a replacement probe
AS4 Lack of data communication Call the Service Centre for a replacement power board
Service
Technical support is offered by qualifi ed Service Centres; reference addresses for specifi c areas are given in the
annex to this manual.
Customer data
A faster and more effi cient service can be provided if the customer promptly communicates the following pur-
chase data:
• invoice number;
• holder of the invoice;
• date of purchase;
• ID number of appliance
CLEANING AND MAINTENANCE
To Next Page
Loading...